Accessories

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges

PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

Hilo Integrated Speed Storage mounts directly to the Hilo Pro or Comp saddle to add a verstatile storage component to your TT or Tri bike. Multiple configurations enable storage for one or two water bottles, tube or tubular, as well as multi-tool, tire levers, and CO2. Best of all, the design works with the bike and rider's aero profile to minimize drag. - Attaches to Hilo Pro or Comp saddle for aerodynamic water bottle and accessory storage - Securely holds CO2, inflator, and lever in compact accessory bag - Adaptable strap can be easily set up to hold spare tube or tubular tire - Secure aerodynamic mounting for up to two water bottle cages

3/8" drive Zyklop bit sockets. - 9-piece bit-socket set on a robust textile belt, 3/8 - Bit-sockets with all the advantages of the Wera bit technology - Bit-sockets with holding function for screws/bolts - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 3 TORX HF Zyklop bit socket set with holding function, 3/8" drive, 9 pieces - 9x 8767 B HF TORX: TX 10x35.0, TX 15x35.0, TX 20x35.0, TX 25x35.0, TX 27x35.0, TX 30x35.0, TX 40x35.0, TX 45x38.5, TX 50x38.5 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm

- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

- Supercharged 1:30 to 95 hour run time - Extremely powerful 1,500 lumens in an astonishingly compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets. - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Uses and Features: - Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to: - Wheel building -Cassette removal and installation - Tire and tube removal and installation - Tubeless tire work - General cleaning - Hub work - Holds wheel at vertical, 35 degrees from vertical, and horizontal positions - Accepts 12, 15, and 20mm thru axles and 5mm skewers - E-Nickel finish for durability

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Premium aerodynamic load bar for an exceptionally quiet ride and easy installation of accessories. 1-pack. - Aerodynamic and quiet - Sliding functionality for easy loading - Easy to install and use Features: - Load bar for Thule Edge roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - Designed and developed for swift click-in assembly with Thule Edge load carrier feet, providing an integrated, low-profile roof rack and a custom look - Smooth installation and removal of accessories thanks to upper T-track with QuickAccess interface - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length Specifications: - Loading width: 36-40 in - Length (in): 41 - Maximum load: lb/75 kg. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb

BORDO™ 6000C LED THE CLASSIC BORDO WITH OPENING CODE AND LIGHT Never be left in the dark again. The BORDO™ 6000C LED can be used to illuminate the combination set window. This way, you can unlock the bike lock at night if there is limited light. The BORDO™ 6000 has become a real classic over the years - the clever design has won friends all over the world with its high level of security, flexibility and compact size. The 5 mm bars connected with specially designed drill resistant rivets can be folded for easy transport. The BORDO™ 6000C LED adds another member to the BORDO™ 6000 family. The C in the product name indicates that this is a combo lock with code. The integrated LED light gives you enough light to see the set numbers even in the darkest locations. Is there need to worry that the numbers might wear off or fade over time? Not at all - the numbers are not printed. Instead, we produce the code dials from two durable components that guarantee long-term readability. - 5 mm thick bars, extra-soft coating to prevent damage to paintwork - The bars and the housing are made of specially hardened steel - Bars are connected by special rivets - Integrated LED lamp for illuminating the code dials - A CR1220 button battery to power the LED lamp is included - Two-component code dials ensures long-lasting legibility - Opening code can be set individually

The high-quality XPlus cylinder on the Steel-O-Chain 9808K chain lock provides excellent protection against manipulation of the lock and thus against theft. No matter if someone tries to break into the bike lock or the XPlus cylinder with conventional tools, or even special ones – they won’t get very far. The built-in XPlus cylinder and the 8 millimetre specially hardened steel chain provide great theft protection. In order to protect the paintwork on the bike in the long run, the chain is covered with a textile sleeve. Even the keyhole has a cover to protect it from dirt and corrosion. Well secured, your bike can be parked with no worries. - 8 mm square chain. - The chain, housing and structural parts of the locking mechanism are made of specially hardened steel. - Automatic keyhole cover to prevent corrosion and the ingress of dirt. - ABUS XPlus cylinder for the greatest protection against manipulation such as picking. - Great protection for when there is a high risk of theft - Two keys included.

Thirst, quenched. Things, carried. Carry everything you need and keep your hydration handy with the Adventure Handlebar Bag. This bag has a zippered pocket with a 1.5L hydration bladder and an easy-access silicone hose port so you can quench your thirst with ease. Plus, quickly stow a rain jacket, extra layer, and other ride essentials with 9L of capacity and an additional bungee cord and strap up top. A durable, easy to install handlebar bag made with an integrated hydration bladder so you can carry more and stay hydrated wherever you roam. - Roll-top closure with secure buckle keeps your gear safe and dry - Two nylon handlebar straps and single stem strap provide secure attachment - 1.5L HydraPak hydration bladder fits securely in front zippered pocket - Silicone hose port and magnetic hose clasp keeps hydration hose securely in place - Water-resistant construction helps keep your gear dry - Durable materials are made to last with additional reinforcement in high-wear areas - 9L capacity and bungee up top offers additional quick and easy storage

Saddle up and carry more Safely carry your ride essentials through rough and rugged terrain with the Adventure Seatpost Bag. Two buckles around the saddle rails and a hook and loop closure make this bag easy to mount and extra secure. Zippered side entry offers easy access to this bag's 9L of capacity, and an additional bungee cord and strap up top makes it easy to quickly stow a rain jacket, extra layer, and more. A durable saddle bag that installs quickly and securely and features an easy-access side zipper so you can carry more on your bike. - Roll-top closure with secure buckle keeps your gear safe and dry - Two nylon seat rail buckles and single seatpost strap provide secure attachment - Zippered side entry offers easy access - Removeable internal poly frame maintains bag shape without taking up space - Water-resistant construction helps keep your gear dry - Durable materials are made to last with additional reinforcement in high-wear areas - 9L capacity and bungee up top offers additional quick and easy storage