Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

$29.95
Convenient, state-of-the-art storage case with a stealth carbon-look finish fits securely in cages. Rattle-proof padding for a noiseless ride. Ideal for road-side repair tools. - Capacity: 25.8 cubic inches (423 cubic cm) - Height: 5.25 in (133.5 mm) - Weight: 65g
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$44.95 - $49.95
Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris. - Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks - Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base - Slim, streamlined design that will stay out of the way of cranks and pedaling legs
$7.00
These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.
$119.99
A durable, carry-everything full frame pack that installs quickly to let you adventure farther. - Available in four sizes to best fit more frames and adventures - Mount with thumb screws (sold separately) to bikes with integrated boss mounts - Large main pocket and smaller compartment pocket make it easy to stay organized - Gold lining and internal mesh pockets make finding your gear a cinch - Water-resistant construction helps keep your gear dry - Durable materials and robust zippers are designed to last
$59.99 - $69.99
A secure, direct-mounted saddle bag with quick connections for the Blendr Fendr and rear lights - Quickly connect Blendr Fendr and rear lights with purposeful mounts in seconds - Two internal pockets reduce rattling and hi-vis material makes it easy to find what you need - Made with durable, soft, and water-resistant nylon with an easy-to-use zipper - Integrated design that mounts directly to compatible saddles with 2 m5 hex bolts - Compatible with Aeolus, Verse, Boulevard, and Commuter saddles. Not compatible with RSL-level saddles - Included: bag, mount, spacer, one pair of short bolts, and one pair of longer bolts
$319.99
Load up the kids and hit the road with the Family Pack Kit. - Includes safari bar, seat pads, back rest, foot guards, and installation hardware - Safari bar offers children a secure handhold while allowing room to look around - Full coverage foot guards help keep tiny feet and fingers out of the rear wheel - Fully compatible with Fetch+ 2 Rear Pannier Kit - Carries two passengers up to 36kg (79 lbs.) each - We know what you're thinking: the kit is not to be used with one 72kg (158 lbs.) passenger
$179.99
Get more done, have more fun Grocery getter? Puh-lease. The Fetch+ 2 Rear Pannier Kit's enormous carrying capacity lets you check even more items off the to-do list per trip. These deep, fully rigid panniers are built to ease unwieldy loads by lowering their center of gravity on the bike. The panniers are also fully weather-proof and include drain holes. Give your Fetch+ 2 enormous carrying capacity with these purpose-built, all-weather panniers. - 36 kg (79 lbs.) carrying capacity per side - 44L volume per side - The Rear Pannier Kit replaces the foot guards included in the Family Pack Kit - Includes all installation hardware - Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.)
$85.99
Adds functionality. Adds style. - Designed specifically for the 2021-2023 Powerfly FS - Requires specific 2021 Trek Powerfly FS rear full fender to mount - Compatible with MIK, standard trunk bags, and panniers - Does not include mounting hardware - Compatible with 27.5" and 29" wheel Powerfly
$52.99
Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum
$89.95
A quick mount handlebar drybag that can be used alone or mounted as an accessory bag atop our FrontLoader bag system. Featuring sonically welded seams, a roll top closure and weathertight zippers the BarLoader protects your valuable gear from dry dusty trails or rain when riding in wet conditions. CAPACITY - 6.5 L / 395 ci MATERIAL - TPU BAG ATTACHMENT - Quick release buckles and hook and loop fastener MAX LOAD CAPACITY - 3 kg / 6.61 lb ADDED FEATURES - Inner bag, Reflective printing, Shoulder strap SIZE - 31 x 25.8 x 8.9 cm / 12.2" x 10.2" x 3.5" WEIGHT - 276 g / 9.73 oz
$104.95
Pack all the gear you need and enjoy the freedom of bikepacking. FrontLoader is perfect for carrying light yet bulky items like sleeping bags, camping gear and spare clothing. Featuring a tough outer support harness and constructed of durable abrasion- and water-resistant materials, it's easily installed or removed with two straps, special spacer mounts, and quick-release buckles. A backside head tube strap attachment increases load stability. An 8-liter removable waterproof drybag keeps contents completely protected from wet weather and splashes while a built-in air release button purges unwanted air from the bag to effectively compress its contents. - Material: Polyethylene / EVA / Anti-slip texture PU leather - Durable, water repellent and stain resistant - Bag Attachment: Durable NBR rubber spacers and straps with quick-release buckles - Waterproof Rating: 10,000 mm (waterproof carry bag) - Max Load: 5kg / 11lb - Waterproof carry bag - Air release button Size - 33 x 28.7 x 5cm / 13" x 11.3" x 2" - 50 x 15 x 15cm / 19.7" X 5.9" x 5.9" (Waterproof Carry Bag) Weight - Bag: 325g / 11.46oz (Black), 319g / 11.25oz (Green) - Rubber Spacers: 132g / 4.65oz
$52.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
$134.95
The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or hardtail MTB without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts levels independently of the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Seatstays with hook-and loop-straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, KLICKfix / RackTime Snapit or Vario system bags - Max Load: 12kg / 26lb - Clamp for rear reflector - Size: 42 x 33. 2 x 14.5cm / 16.5" x 13.1" x 5.7" - Weight: 960g / 2.12lb
$63.00
The small-but-mighty Moxie Top Tube Bag is sure to be a permanent accessory on your trusty, two-wheeled steeds where it tucks nicely into the nooks and crannies of your bike. This secure bicycle top tube bag puts essentials like snacks, gloves or your phone at arm's reach and just a zipper pull away. A dream cockpit set-up combines the Moxie Top Tube Bag with Sidekick Stem Bag or the Gibby Stem Bag. The Moxie Top Tube Bag is made out of recycled polyester and contains roughly 2 plastic bottles rescued from polluted rivers. Coming in at around half a liter of volume, the Moxie Top Tube Bag is the perfect home for smaller gear and snacks protected by a water-resistant zipper for ease of access and tough ECOPAK™ fabric. We built in added protection for delicate cargo with side-wall stiffeners and a layer of padding. The daisy chain webbing attachment system paired with One Wrap velcro straps (included in the purchase) allows for flexible attachment. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Nylon mesh stiffener - Closed cell foam padding - YKK water-resistant zipper - Comes with 3 One Wrap Velcro attachment straps and flexible mounting points - Made in Surabaya, Indonesia out of recycled materials. Dimensions: - Measurements: 4.125" x 8.5" x 2" - Capacity: 0.6 Liters - Weight: 2.75 oz
$14.99
Are you trying to carry an oddly-shaped item on your rack? Sunlite's Bungee Cargo Net will secure it for the ride home. It is 13 x 13 inches in size and the 4 vinyl coated hooks help secure it to your rack.
$50.00
Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm
$120.00
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
$10.00
- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend
$37.00
The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g
$68.00
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)
$125.00
The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)
$240.00
The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)
$9.99
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two
$89.00
The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design
$18.99 - $19.99
The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs
$74.99
This spacious yet compact bag is the ideal accompaniment for day rides. Elasticated side pockets and the unique canister shape mean you'll easily have room for tools, tubes and extra clothes. The Canister Bag features a rear shock cord retention strap along with a Hypalon loop to attach a front light, which is perfect for early starts or late finishes. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 116g Capacity - 1.5L WATERPROOF MATERIALS A specially developed combination of technical materials like VX21 and 1000D textured nylon work in conjunction with coated nylon linings to keep the worst of the elements at bay. VEGAN FRIENDLY Our signature brown Restrap label may look like leather but fear not - no animals have been harmed in the making of our products. PU leather or heat-pressed labels mean our kit not only looks great, but is cruelty free too. FITS ANY BIKE Our bags are designed to be as universal as possible, providing a modular luggage system for the needs of any rider, on any bike, on any journey. HANDMADE IN THE UK Our bags are handmade by our team of highly skilled machinists and rigorously tested in the Yorkshire dales. We control the manufacturing process from start to finish to guarantee the quality of the products that leave our factory door. LIFETIME WARRANTY We stand by our products and subsequently offer a comprehensive lifetime guarantee against all defects in materials and workmanship. No matter how many journeys your bag has been on, if it's on us we'll fix it. SPECIALIST ADVICE & AFTERCARE We design, we make, we ride. Our team is full of cyclists that are passionate about our products and the adventures they are for. If you need any guidance or assistance before, during or after your trip we are happy to offer expert advice.
$88.00
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
$30.00 - $35.00
Practical, comfortable and capable, the Daylight Waist is made for people on the move. Keep your phone, wallet, keys and other valuables organized and close at hand in this spacious waist pack. Hike, bike or take the dog for a walk with peace of mind knowing your belongings are safe, sound and secured around your body. Constructed with high-quality bluesign-approved recycled fabrics, GRS-certified recycled polyester and a PFC-free DWR coating. Versatile The Daylite Series accommodates a kaleidoscopic range of activities from day hikes on local trails to festivals, farmers markets and global travel. Sustainable Materials Constructed with main body bluesign-approved fabrics, GRS-certified recycled polyester and PFC-free DWR; a sustainable build that's durable and can take years of everyday wear and tear. Compatibility Compatible as an attachment to several Osprey travel and backpacking bags for additional storage and carry options, the Daylite and Daylite Plus are great bags to have around town or as a summit pack. - Zippered main compartment - External, front panel zip pocket - Interior mesh organizer and key clip - Adjustable 38mm webbing hipbelt
Page 1 of 15 Next page