Accessories

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.

Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Thirst, quenched. Things, carried. Carry everything you need and keep your hydration handy with the Adventure Handlebar Bag. This bag has a zippered pocket with a 1.5L hydration bladder and an easy-access silicone hose port so you can quench your thirst with ease. Plus, quickly stow a rain jacket, extra layer, and other ride essentials with 9L of capacity and an additional bungee cord and strap up top. A durable, easy to install handlebar bag made with an integrated hydration bladder so you can carry more and stay hydrated wherever you roam. - Roll-top closure with secure buckle keeps your gear safe and dry - Two nylon handlebar straps and single stem strap provide secure attachment - 1.5L HydraPak hydration bladder fits securely in front zippered pocket - Silicone hose port and magnetic hose clasp keeps hydration hose securely in place - Water-resistant construction helps keep your gear dry - Durable materials are made to last with additional reinforcement in high-wear areas - 9L capacity and bungee up top offers additional quick and easy storage

Saddle up and carry more Safely carry your ride essentials through rough and rugged terrain with the Adventure Seatpost Bag. Two buckles around the saddle rails and a hook and loop closure make this bag easy to mount and extra secure. Zippered side entry offers easy access to this bag's 9L of capacity, and an additional bungee cord and strap up top makes it easy to quickly stow a rain jacket, extra layer, and more. A durable saddle bag that installs quickly and securely and features an easy-access side zipper so you can carry more on your bike. - Roll-top closure with secure buckle keeps your gear safe and dry - Two nylon seat rail buckles and single seatpost strap provide secure attachment - Zippered side entry offers easy access - Removeable internal poly frame maintains bag shape without taking up space - Water-resistant construction helps keep your gear dry - Durable materials are made to last with additional reinforcement in high-wear areas - 9L capacity and bungee up top offers additional quick and easy storage

Hilo Integrated Speed Storage mounts directly to the Hilo Pro or Comp saddle to add a verstatile storage component to your TT or Tri bike. Multiple configurations enable storage for one or two water bottles, tube or tubular, as well as multi-tool, tire levers, and CO2. Best of all, the design works with the bike and rider's aero profile to minimize drag. - Attaches to Hilo Pro or Comp saddle for aerodynamic water bottle and accessory storage - Securely holds CO2, inflator, and lever in compact accessory bag - Adaptable strap can be easily set up to hold spare tube or tubular tire - Secure aerodynamic mounting for up to two water bottle cages

Light up your ride day or night with this USB-chargeable bicycle light set ready to be used as a daytime running light or illuminate any trail after dark. See and be seen with the Ion Elite R / Flare R City Set. The Ion Elite R provides enough power to light up any road or trail, and the Flare R City gives you the added safety of a rear daytime running light. Both are USB-chargeable and feature distinctive daytime flash settings that are visible from up to 2km away. - Ion Elite R provides a powerful beam that lights up the full width of any road or trail - Flare R City provides a wide visibility angle ideal for streets and paths - Specifically designed focus, flash, and range patterns offers ultimate daytime visibility - Easily attaches to your handlebars, helmet, or bike mount - Includes Ion Elite R, Flare R City, adjustable hard mount, quick connect bracket, and micro USB charging cable

Stay trail-ready and daytime visible with this powerful light set packed with industry leading features. See and be seen The ultimate "see and be seen" bicycle light combo, this set is the easiest way to stay safe when you ride. The Ion Pro RT provides enough power to light up any trail, and the Flare RT is the ultimate daytime running rear light. Both are USB rechargeable and feature distinctive daytime flash settings that are visible from up to 2km during the day. Product details - Ion Pro RT provides a powerful beam that lights up the full width of any road or trail - Flare RT provides ultimate visibility for any road, city, or path - Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and wireless control - Specifically designed focus, flash, and range flash patterns for daytime visibility for up to 2km - Easily attaches to your handlebars, helmet, or bike mount

The Bontrager Commuter Double Pannier delivers versatile capability to your bike so you can carry more and ride more. The integrated MIK mounting system makes installation and removal a breeze with compatible MIK racks. Additional accessory pockets and an easy-to-load main compartment add functionality to this durable, symmetric design made from waterproof materials. - MIK mounting system provides secure, integrated mounting with compatible racks - Made from durable, waterproof material to help keep your gear safe - Large compartment holds shape for easy loading and unloading with roll-top buckle closure - External pockets and compartments help organize accessories and gear - Sturdy handle pairs with MIK system to make this double pannier easy to remove and carry - Reflective materials enhance visibility with a stylish finish

Everyday utility The MIK Utility Trunk Bag with Panniers offers simple and secure on-bike storage that's easy to install and remove without the need for tools. It has multiple pockets to keep you organized, built-in panniers for extra carrying capabilities, a durable design with reflective materials,Everyday utility and built-in rain cover to keep you and your gear safe and secure in all conditions. Product details - MIK mounting system provides secure, integrated mounting with compatible racks - Front and rear black reflective materials enhance visibility with a stylish finish - Integrated panniers offer expandable storage and easily stow in pockets when not in use - Stay organized with internal mesh pocket and two side pockets, each with a smaller internal pocket - Zippered pocket with soft lining provides secure phone storage accessible from top of bag - Be ready for weather with an integrated rain bag securely stowed in rear pocket - Light loop for easy rear light mounting - Adjustable carrying strap for convenient off-bike use Specifications - Cargo capacity: 2200 cu in (36.1L) - Bag type: Trunk bags - Dimensions: 35cm (l) x 20cm (w) x 20cm (h) - Attachment: Interchange - Material: Woven

A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle

The Benno Utility Panniers have a massive 30L capacity with a versatile design that can carry a variety of different loads, big and small. The adjustable strap system lets you secure anything from boxes to oversized items by simply tightening the horizontal and vertical straps. Depending on the size of the item, you can either close the cover or roll it up and fasten it with a Velcro strap to allow an opening for the load to extend out. - Dimensions: 17-25cm x 55 x 42cm (W x L x H) - For Boost E and Carry On - Sold individually - Durable and water resistant Cordura

Ideal for carrying lightweight, compressible kit, the Expedition Handlebar Pack is a handy partner for long-distance road tours, weekend trips, or even a daily ride to work. Eliminating the need for a bulky front rack, the Pack fastens to handlebars with a reinforced attachment system that adds stability while improving handling and preventing abrasion. Dual roll-top closure keeps the contents secure, while allowing flexible packing capacity. A hands-free air release vent makes compressing the Pack hassle-free, while welded seams ensure that contents stay dry in all conditions. Materials The Expedition Handlebar Pack is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Handlebar Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, we’ve chosen Woojin buckles for their strength and reliability.

The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.

The evolution of speed. Our new expansive six base single lens shield increases peripheral vision and protection. We deliver enhanced vision and clarity by following the natural contours of your eye. Featuring cooling vents and uncompromising fit with three-way adjustable temple arms. The ultimate performance paired with aggressive futuristic styling. - Lightweight high-impact Polycarbonate; 6 base, vented spherical shield - New quick-release lens system - 100% UV protection - Grimalid TR90 frame is custom molded to increase strength - Three way adjustable temple tips providing a secure comfortable fit - Thermoplastic elastomer nose and temple pads help provide all day comfort - Lens features scratch resistant coating and HYDROILO treatment to repel oil and water - Comes with a sport case, microfiber cleaning bag, extra alternative fit nose pad and, spare clear replacement lens

When race day arrives, the last thing you want to worry about is organization. The Zipp Transition 1 Gear Bag has multiple compartments to keep your essentials easy to find and converts quickly from backpack to duffel with a removable shoulder strap. A top molded pocket protects valuable items like cell phones and sunglasses, while a large ventilated lower compartment keeps shoes or wet clothes separated from the main hold. Camera bag-style dividers, an adjustable helmet pocket, and water-resistant fabric further extend the Transition 1's versatility, providing race-day relief from basic, cluttered alternatives. - Center compartment includes camera bag-style dividers to keep items organized. - Large ventilated lower compartment for shoes or wet clothing. - Adjustable helmet pocket. - EVA top pocket. - Side net for water bottles. - Reflective tabs. - Total volume of 56 liters

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

Whether you're tinkering on your gear, prepping a meal for your crew, or mixing drinks for a night of fun, the EXO BackDeck is the perfect solution, turning your EXO system from gear hauler to working surface to bar top in seconds. When you're done, simply stow it and get back on the road. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - 50" x 17" UV protected bamboo work surface - Tool-free, locking SpeedKnobs attach and lock EXO BackDeck to EXO SwingBase or EXO TopShelf - Included bag protects the tabletop when not in use and makes for easy transport - Sized to store inside the EXO GearLocker or EXO GearWarrior - 80lb weight capacity - 1 Year Warranty - Not intended to be used as a cutting surface - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 10.80 lbs. - Dimensions: L 17.00 in x W 50.50 in x H 0.75 in - Limited One Year Warranty

We made hauling from home to vehicle to anywhere a snap with the EXO WarriorWheels—wheels and a handle that connect to your EXO GearWarrior, even while it's still on your hitch. Simply snap it together and wheel your gear to wherever you're headed next, whether it's basecamp, the beach or the marina. - Connects to the EXO GearWarrior (or other Warrior baskets) in minutes without tools - All-terrain tires maneuver well over all types of surfaces and handle curbs and roots with ease - Roll up to 110 lbs. of gear to your camp or soccer practice - Large easy to grab handle is positioned to allow for maximum control when going downhill - 2 Year Warranty - Not intended to remain installed during vehicle transport Product Specs: - Weight: 18.50 lbs. - Dimensions: L 64.00 in x W 21.00 in x H 39.00 in - Limited Two Year Warranty

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

SafetyMate ensures you are street-legal when using the StageTwo and StageTwo +2. Keep the clean lines and style of the StageTwo family going with the clean LED Lightbar and internal electrical routing. Safety never looked so good. PRODUCT DETAILS - Keeps your lights and license plate visible while on the road? - Attachment points allow SafetyMate to be visible while StageTwo is in use as well as folded up - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - Wiring is internally routed through StageTwo and StageTwo +2 for a clean look - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Compatible with StageTwo and StageTwo +2

Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)

8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor